Skip to end of metadata
Go to start of metadata

Performs alignment of short reads with Bowtie.

Parameters in GUI

 

Output directoryDirectory to save Bowtie output files. 
Reference genomePath to indexed reference genome. 
Output file nameBase name of the output file. 'out.sam' by default.out.sam
LibraryIs this library mate-paired?single-end
Mode

When the -n option is specified (which is the default), bowtie determines which alignments are valid according to the following policy, which is similar to Maq's default policy. In -v mode, alignments may have no more than V mismatches, where V may be a number from 0 through 3 set using the -v option. Quality values are ignored. The -v option is mutually exclusive with the -n option.

-n mode
Mismatches number

Mismatches number.

2
Mismatches numberMaximum permitted total of quality values at all mismatched read positions throughout the entire alignment, not just in the seed. The default is 70. Like Maq, bowtie rounds quality values to the nearest 10 and saturates at 30; rounding can be disabled with --nomaqround.70
Seed lengthThe seed length; i.e., the number of bases on the high-quality end of the read to which the -n ceiling applies. The lowest permitted setting is 5 and the default is 28. bowtie is faster for larger values of -l.28
Maximum of backtracksThe maximum insert size for valid paired-end alignments. E.g. if -X 100 is specified and a paired-end alignment consists of two 20-bp alignments in the proper orientation with a 60-bp gap between them, that alignment is considered valid (as long as -I is also satisfied). A 61-bp gap would not be valid in that case. If trimming options -3 or -5 are also used, the -X constraint is applied with respect to the untrimmed mates, not the trimmed mates. Default: 250.800
Best hits

The number of megabytes of memory a given thread is given to store path descriptors in --best mode. Best-first search must keep track of many paths at once to ensure it is always extending the path with the lowest cumulative cost. Bowtie tries to minimize the memory impact of the descriptors, but they can still grow very large in some cases. If you receive an error message saying that chunk memory has been exhausted in --best mode, try adjusting this parameter up to dedicate more memory to the descriptors. Default: 64.

64
SeedUse as the seed for pseudo-random number generator.0
ColorspaceWhen -C is specified, read sequences are treated as colors. Colors may be encoded either as numbers (0=blue, 1=green, 2=orange, 3=red) or as characters A/C/G/T (A=blue, C=green, G=orange, T=red).False
No Maq rounding

Maq accepts quality values in the Phred quality scale, but internally rounds values to the nearest 10, with a maximum of 30. By default, bowtie also rounds this way. --nomaqround prevents this rounding in bowtie.

False
No forward orientationIf --nofw is specified, bowtie will not attempt to align against the forward reference strand.False
No reverse-complement orientation

If --norc is specified, bowtie will not attempt to align against the reverse-complement reference strand.

False
Try as hardTry as hard as possible to find valid alignments when they exist, including paired-end alignments. This is equivalent to specifying very high values for the --maxbts and --pairtries options. This mode is generally much slower than the default settings, but can be useful for certain problems. This mode is slower when (a) the reference is very repetitive, (b) the reads are low quality, or (c) not many reads have valid alignments.False
Best alignmentsMake Bowtie guarantee that reported singleton alignments are best in terms of stratum (i.e. number of mismatches, or mismatches in the seed in the case of -n mode) and in terms of the quality values at the mismatched position(s). bowtie is somewhat slower when --best is specified.False
All alignmentReport all valid alignments per read or pair.False
Parameter
Description
Default value

Parameters in Workflow File

Type: align-reads-with-bowtie

output-dirOutput directory

string

referenceReference genomestring
outnameOutput file namestring
libraryLibrarystring
mismatches_typeModestring
mismatches_numberMismatches numbernumeric
maqerrMismatches numbernumeric
seedLenSeed lengthnumeric
maxbtsMaximum of backtracksnumeric
chunkmbsBest hitsnumeric
seedSeednumeric
colorspaceColorspaceboolean
nomaqroundNo Maq roundingboolean
nofwNo forward orientationboolean
norcNo reverse-complement orientationboolean
tryhardTry as hardboolean
bestBest alignmentsboolean
allAll alignmentboolean
Parameter
Parameter in the GUI
Type

Input/Output Ports

The element has 1 input port:

Name in GUI: Bowtie data

Name in Workflow File: in-data

Slots:

URL of a file with mate readsreadsurlstring
URL of a file with readsreadspairedurlstring
Slot In GUI
Slot in Workflow File
Type

And 1 output port:

Name in GUI: Bowtie output data

Name in Workflow File: out-data

Slots:

Slot In GUI
Slot in Workflow File
Type
Assembly URLassembly-outstring
  • No labels